Prisms, Poles and Targets

Double Right Angle Prism

This compact and precise right angle prism allows for easy determination of right angle points or rectangular points between two targets. The protective metal cover rotates to expose the pentagonal prisms. (includes leather belt case)

Quik-Lok™ Prism Poles

Offers fast setup and positive clamping without pinched fingers! Forget about inaccurate readings due to a slipping pole--the Quik-Lok will get the job done with its fast setup and positive clamping.Features 10ths and metric (every 2mm) graduations and precise adjustable 5/8" X 11 mounting stud to suit all commonly used prisms. Available in :

• #67-4508TMA - 8'/2.5m, 2 Section Quik-Lok™ Pole, 1-1/4" (32mm) diameter
• #67-4509TMA - Lightweight Version of 67-4508TMA, 1" (25mm) diameter
• #67-4512TMA - 12'/3.6m, 3 Section Quik-Lok™ Pole, 1-1/4" (32mm) diameter
• #67-4515TMA - 15'/4.6m, 4 Section Quik-Lok™ Pole, 1-1/2" (38mm) diameter

Leica Compatible Quik-Lok™ Prism Poles

These poles are compatible in all aspects with Leica and CST Leica-compatible prisms. Construction and clamping mechanism is the same as our high quality Quik-Lok Prism Poles, but with a Leica mounting stud. Bottom sections are electrostatically painted in alternating white and red stripes. Available in :

• #67-4508TML - 8'/2.5m, 2 Section Quik-Lok™ Pole, Leica-Type stud, 1-1/4" (32mm) diameter
• #67-4512TML - 12'/3.6m, 3 Section Quik-Lok™ Pole, Leica-Type stud, 1-1/4" (32mm) diameter
• #67-4515TML - 15'/4.6m, 4 Section Quik-Lok™ Pole, Leica-Type stud, 1-1/2" (38mm) diameter

Brass Collet Lock Prism Poles

These telescoping prism poles are constructed of high strength aluminum that is resistant to warping and breakage. The bottom section is carefully treated and painted in alternating sections of red and white. The graduated sections are anodized silver with uneraseable, impregnated black graduations. Each pole features a recessed circular vial for vertical alignment, and a replaceable hardened steel point. Available in graduated (10ths and metric) and non-graduated models with non adjustable 5/8" X 11 mounting stud; Wild/Leica type mounting stud is available. Available in :

• #67-4204 - 4'/1.25m 2 Section Mini Prism Pole, Non-Graduated, 1-1/4" (32mm) diameter
• #67-4209 - 8'/2.5m 2 Section Collet Lock Prism Pole, Non-Graduated, 1-1/4" (32mm) diameter
• #67-4209TM - 8'/2.5m 2 Section Collet Lock Prism Pole, 10ths/Metric, 1-1/4" (32mm) diameter
• #67-4212 - 12'/3.6m 3 Section Collet Lock Prism Pole, Non-Graduated, 1-1/4" (32mm) diameter
• #67-4212TM - 12'/3.6m 3 Section Collet Lock Prism Pole, 10ths/Metric, 1-1/4" (32mm) diameter
• #67-4215TM - 15'/4.6m 4 Section Collet Lock Prism Pole, 10ths/Metric, 1-1/2" (38mm) diameter

Quick Release Prism Poles

The clamping mechanism is a pistol grip, quick release type which allows fast setup and take-down. Special 409 blue "Lock-Tite™" holds set screw in position but allows adjustment of clamping tension to individual preference. Heavy duty spring is recessed into handle for protection and does not come out during field use. The bottom aluminum section is carefully treated and polished prior to being electrostatically powder painted translucent candy apple red with precise striping in white. 5/8" x 11 mounting stud. Available in :

• #67-4304 - 4'/1.25m 2 Section Mini Quick Release Prism Pole, Non-Graduated , Nonadjustable Stud 1-1/4" (32mm) diameter
• #67-4308TM - 8'/2.5m 2 Section Quick Release Prism Pole, 10ths/Metric, Nonadjustable Stud, 1-1/4" (32mm) diameter
• #67-4308TMA - 8'/2.5m, 2 Section Quick Release Pole, 10ths/Metric, Adjustable Stud, 1-1/4" (32mm) diameter
• #67-4312TM - 12'/3.6m 3 Section Quick Release Prism Pole, 10ths/Metric, Nonadjustable Stud, 1-1/4" (32mm) diameter
• #67-4312TMA - 12'/3.6m, 3 Section Quick Release Pole, 10ths/Metric, Adjustable Stud, 1-1/4" (32mm) diameter

Range Poles

Constructed of a high strength aluminum core with alternating international orange and white ABS plastic tubing permanently attached to the aluminum. The heavily pigmented colors will resist fading and weathering under the toughest conditions. The pole is 1-1/16" (27mm) in diameter with 5/8" x 11 thread joints for quick and easy assembly. Furnished complete with a solid steel hardened point. Metric range poles feature the same construction as regular poles. Two 1.25m sections create a 2.5m pole, with alternating white and orange every 50cm.

Value Line Range Poles

Ideal for the economy-minded user, our Value Line range poles are made from lightweight extruded aluminum sections and impact-resistant ABS and Delrin. Cam-locking 2-meter telescoping sections feature alternating red and white stripes 8" (20cm) apart. Extended height is 2 meters, collapsed height is 1.2 meters. A 5/8" x 11 prism adapter is available.

Premium Series 0/-30mm Constant Prism System

Fully compatible with leading manufacturers such as Sokkia, Topcon, Pentax, Nikon, etc. All metal holder and target warranted for life Hermetically sealed 2-1/2" (62.5mm) precise prism Tension adjusting brass knob Brass 5/8" x 11 bayonet adapter Colors available: Orange, Chartreuse, Yellow

Tilting Triple Prism

0/-30mm offset Three hermetically sealed 2-1/2” (62.5mm) precise prisms All-metal holder, target, and yoke, electrostatically powder painted for durability and warranted for life Nickel plated brass 5/8” x 11 bayonet adapter

Universal Series Prisms

Get outstanding performance and value with these 0/-30mm offset prisms. 0/-30mm offset Precision ground glass up to 2 arc seconds Fully compatible with leading manufacturers such as Sokkia, Topcon, Pentax, Nikon, etc. Hermetically sealed 2-1/2" (62.5mm) Precise prism Prism can mounting thread: M20 x 2 Single tilt holder tilts to 350° Stainless steel hardware Bayonet adapter and 5/8" x 11 female mounting thread on holder Prism canister and holder/target molded from durable lightweight polycarbonate Holder and yoke carry a three year warranty Colors available: Red, Yellow, Black, Hi-Vis Chartreuse

Robotics Prisms

High precision 360º robotic prisms ensures tracking lock with the robotic instrument is quick.

• 6 high precision copper coated 25.4 mm prisms housed in a precisely CNC machined aircraft grade aluminum housing
• Dual 5/8-11 mounting threads (female)
• 0 mm offset

Leica Compatible Snap-In Prisms

Just because you paid a lot for your EDM/Total Station, doesn't mean you have to for your prism system. CST's "snap-in" prisms and holders are compatible and interchangeable with Leica/Wild holders and prisms. Your satisfaction is guaranteed! Features: -34mm offset with Leica compatible H.I. and push-button mounting

Leica Compatible 62.5mm Prisms

Features: -34mm offset with Leica compatible H.I. and push-button mounting Hermetically sealed 2-1/2" (62.5mm) copper coated prisms Tilting prism holder and target molded from impact-resistant Lexan Holder and yoke carry a three year warranty Color available: Black/Yellow

Metal Leica Compatible Tilting Triple Prism Assembly

-34mm offset, push button mounting mechanism with three high precision copper coated prisms. All metal triple prism target, holder, and yoke features a lifetime warranty. Color available: Chartreuse/Black.

All Metal Mini Prism

The "All Metal" Peanut Pack™ is a complete and versatile mini prism system

The Peanut Pack provides low cost versatility for shots up to 3000 feet (900m). It's small and light, making it priceless on shots that involve rough terrain. The versatile mounting options create more freedom and speed in setup. The Peanut Pack is virtually indestructible under most working conditions, as it is precision-machined from die-cast aluminum then electrostatically powder-painted for a long-lasting and durable finish. One Year Warranty.

• 0/-30mm offset on dual-sided aluminum tilting target
• 1" (25.4mm) diameter prism, sealed in black anodized aluminum can
• On-board offset circular bubble vial
• 5/8" x 11 mounting thread
• New dual-sided target design
• Precision prism ground up to 2 arc seconds
• Can's point permits measurement of corners (offset 0mm)
• Colors available: Black with Red, Yellow, or Hi-Vis Chartreuse Target

Mini Prism System for Stakeout Jobs

Specially designed for close-in stakeout jobs, this prism system has dual 5/8" x 11 screw threads to allow threading in of poles on each end. Dual circular vials are standard. Includes padded carrying case and prism point.

The "Original" Peanut Pack™ Mini Prisms

Holder and target molded from durable high-impact ABS plastic. One Year Warranty

• 0/-30mm offset on dual-sided tilting target
• 1" (25.4mm) diameter prism, sealed in black anodized aluminum can
• On-board bubble level vial on holder
• 5/8" x 11 mounting thread
• Dual-sided target
• Stainless steel hardware
• Precision prism ground up to 2 arc seconds
• Can's point permits measurement of corners
• Colors available: Red, Yellow, Black